Laufkatzen LST

The high-quality LST trolleys are designed for long-lasting operation with manual hoists*. The trolley can be adjusted to many beam sizes thanks to easily exchangeable spacers. Flange widths from 50 mm to 203 mm are possible. For HEB beams with a flange width of 300 mm, the LST trolley can be adapted to this width using larger bolts.

* For operation with motorized hoists (e.g. electric chain hoist), a higher load capacity level must be selected.

Request now!

The rubber buffers on both sides of the trolley ensure safe operation.The double anti-tip device (“climbing stop”) on both sides prevents climbing onto the carrier.In addition, the angled side plates serve as fall protection and wheel breakage support.

The load capacity of 500 kg to 20,000 kg is distributed evenly and safely over four wheels. The LST trolley is available as an LST-H manual trolley and as an LST-G reel chain trolley with an operating chain with a length of 2.5 m (standard), which can be extended as required.

Trolley LST-H LST-G	0,5 0,5	1 1	2 2	3 3	5 5	10 10	- 20
Load capacity (t)	0,5	1	2	3	5	10	20
Flange width M min.-max. (mm)	50 - 203	64 - 203	68 - 203	100 - 203	114 - 203	124 - 203	136 - 203
Min. curve radius (m)	0,85	1	1,1	1,3	1,4	2	2,4
Hand chain operating length LSTG (m)	2,5	2,5	2,5	2,5	2,5	2,5	2,5
Reel path for 1 m travel LST-G (m)	2,96	3,63	4,65	5,66	6,34	7,98	10,63
A (mm)	85	103	115	125	143	187	250
B (mm)	238	288	338	390	472	476	564
C (mm)	169	207	237	271	307	381	514
D (mm)	54	67	80	100	109	133	170
E (mm)	78	96	111	133,5	145	176	228
F (mm)	3	3	3	4	4	4	4
H (LST-H) (mm)	298	314	325	355	381	388	-
H (LST-G) (mm)	342	363	374	403	428	445	498
J (mm)	102	112	131	153	168	194	234
O (mm)	36	40	48	54	66	80	130
P (mm)	30	36	40	46	52	64	100
Q (mm)	18	22	26	29	37	40	65
R (mm)	Ø 20	Ø 24	Ø 29	Ø 34	Ø 39	Ø 44	Ø 59
S (mm)	23	24	28	26	28	50	55
Weight LST-H (kg)	9	14	22	36	55	86	-
Weight LST-G (kg)	11	16	24	39	59	89	190