Electric cable winch ETSW

Lifting force up to 3000 kg | Voltage: 400 V

The ETSW electric cable winch is suitable for loads from 250 kg to 3,000 kg. Thanks to their modern design, the cable winches can be designed as pulling winches or lifting winches for almost any application, depending on the requirements profile.

It is therefore possible to supply modified versions of the cable winch in accordance with DGUV regulation 54 (formerly BGV D8+) or DGUV regulation 17 (formerly BGV C1) for use on platforms or, if required, to provide the electric winches for explosion-protected areas in an EX version.

Your advantages

Load capacities from 250 to 3,000 kg
Flexible modular design (modular principle)
Can be used as a pulling winch or lifting winch
Low maintenance due to lifetime lubrication
Protection class IP55 - 66, duty cycle 60 % - 100 %

Show datasheet

The ETSW electric wire rope winch offers a lifting capacity range of 250 to 3,000 kg and is characterized by its flexible modular design.

The flexible configuration enables precise adaptation to different application scenarios.

It is an efficient solution for moving, lifting and positioning loads in the industrial and textile sectors.

Basic version electric wire rope winch ETSW

Typ ETSW-1D	250	500	750	1000	1500	2000	3000
Lifting force 1st layer (kg)	250	500	750	1000	1500	2000	3000
Lifting force 5th position (kg)	160	320	480	640	950	1270	1920
Rope Ø (mm)	5	6	7	8	10	12	14
Rope take-up 1st layer (m)	11	11	11	10	10	9	9
Rope take-up 5th layer (m)	75	75	75	75	75	75	75
Erw. per 100 mm verl. Drum 1st/5th layer (approx. m)	4/25	4/25	4/25	4/25	4/25	4/25	4/25
ETSW-1D with standard speed
Speed 1st layer (approx. m/min)	8	8	8	8	8	8	8
Speed 5th layer (approx. m/min)	12	12	12	12	12	12	12
Motor power (kW)	0,37	0,75	1,1	1,5	2,1	2,6	4
ETSW-1D with two speeds
Speed 1st layer (approx. m/min)	4/8	4/8	4/8	4/8	4/8	4/8	4/8
Speed 5th layer (approx. m/min)	6/12	6/12	6/12	6/12	6/12	6/12	6/12
Motor power (kW)	0,25/0,37	0,37/0,55	0,55/1,0	0,7/1,4	1,1/2,2	1,5/2,5	2,9/4,4
ETSW-1D with fast speed
Speed 1st layer (approx. m/min)	12	12	12	12	12	12	12
Speed 5th layer (approx. m/min)	19	19	19	19	19	19	19
Motor power (kW)	0,55	1,1	1,5	2,1	3,2	4,0	5,5

Dimensions electric winch ETSW (basic model)

Dimensions (mm)	250	500	750	1000	1500	2000	3000
L1	800	870	850	960	980	1100	1150
L2	460	460	460	500	500	570	570
B	270	320	360	400	460	550	620
H	295	335	410	460	550	630	700
LTR	300	300	300	300	300	300	300
DTR	65	80	92	105	130	155	185
DFL	155	190	220	250	310	370	430
LB	430	430	430	460	460	520	520
BB1	220	250	310	350	410	500	560
BB2	-	-	-	220	280	320	380
DB	11	11	11	11	11	15	15
Weight without accessories (approx. kg)	35	60	75	110	155	240	380

Double drum diameter, stage and studios

Type ETSW-2D	250	500	750	1000	1500	2000	3000
Lifting force 1st layer (kg)	125	250	375	500	750	1000	1500
Rope Ø (mm)	5	6	7	8	10	12	14
Rope take-up 1st layer (m)	20	20	20	20	19	18	17
Add. per 100 mm verl. Drum 1st layer (approx. m)	7	7	7	7	7	7	7
ETSW-2D with standard speed
Speed 1st layer (approx. m/min)	15	15	15	15	15	15	15
Motor power (kW)	0,37	0,75	1,1	1,5	2,1	2,6	4
ETSW-2D with two speeds
Speed 1st layer (approx. m/min)	7/15	7/15	7/15	7/15	7/15	7/15	7/15
Motor power (kW)	0,25/0,37	0,37/0,55	0,55/1,0	0,7/1,4	1,1/2,2	1,5/2,5	2,9/4,4
ETSW-2D with fast speed
Speed 1st layer (approx. m/min)	22	22	22	22	22	22	22
Motor power (kW)	0,55	1,1	1,5	2,1	3,2	4	5,5

Type: ETSW-stagee and studios

Type ETSW stages and studios	250	500	750	1000	1500	2000	3000
Lifting force 1st layer (kg)	100	200	300	400	630	900	1200
Rope Ø (mm)	5	6	7	8	10	12	14
Rope take-up 1st layer (m)	19	19	19	19	18	17	16
Add. per 100 mm verl. Drum 1st layer (approx. m)	7	7	7	7	7	7	7
Speed 1st layer (approx. m/min)	7/15	7/15	7/15	7/15	7/15	7/15	7/15
Motor power (kW)	0,18/0,25	0,37/0,55	0,4/0,75	0,55/1,0	1,0/1,6	1,5/2,5	2,2/3,4
Prices excl. VAT, shipping costs excl. accessories	from 5.500 €	from 6.640 €	from 7.890 €	from 9.290 €	from 11.520 €	from 13.450 €	from 18.230 €

Dimensions electric cable winch ETSW-2D & ETSW stages and studios

Dimensions (mm)	250	500	750	1000	1500	2000	3000
L1	800	870	850	960	980	1100	1150
L2	460	460	460	500	500	570	570
B	270	320	360	400	460	550	620
H	295	335	410	460	550	630	700
LTR	300	300	300	300	300	300	300
DTR	65	160	185	210	260	310	350
DFL	155	190	220	250	310	370	430
LB	430	430	430	460	460	520	520
BB1	220	250	310	350	410	500	560
BB2	-	-	200	220	280	320	380
DB	11	11	11	11	11	15	15
Weight without accessories (approx. kg)	40	65	85	120	170	280	425

Limit switch / end position switch-off:

The limit switch with protection class IP65, designed as a spindle limit switch, is installed on the drive side as an extension of the drum axis to save space. In the basic version, the limit switch is designed with 2 contacts as an emergency limit switch. In order to prevent the emergency limit switch from starting up during operation, the limit switch is optionally available with 4 contacts to enable it to start up during operation. All 4 contacts are adjustable to allow the greatest possible flexibility of use. If an optional overrunning clutch is required, the limit switch is mounted on the opposite side of the operator.

Frame:
The frame essentially consists of two side plates connected to each other by threaded rods, which provide the necessary stability and are used to hold the drum and to mount or suspend the cable winch on the respective surface. The side plates are designed to accommodate both the drive unit and various accessory options. The functions of your winch can therefore be expanded at a later date, e.g. by adding a freewheel clutch.

Example: Electric cable winch ETSW 250

This short video shows a customized version of the ETSW with a load capacity of 250 kg. In our electric cable winches section, you can see an ETSW winch with a grooved cable drum and a load capacity of 3 t.

Drive:

The cable winches in the ETSW series are available in the standard version as electric cable winches with a three-phase brake motor with an operating voltage of 3 PH / 400V / 50 Hz and a spur gear. Thanks to its duty cycle of 60% and protection class IP55, the winch is suitable for almost uninterrupted use under the toughest conditions, even outdoors.

An ETSW winch with other operating voltages or drive types is available on request.

Winch drum:
The standard version of the ETSW cable winch is initially designed with a smooth drum body. On request or if there are technical requirements (e.g. reducing the distance to the first deflection), we can also supply the electric cable winch with a grooved cable drum. Due to the modular design, every ETSW winch can also be converted from a smooth to a grooved rope drum after completion. It is also possible to obtain optional stainless steel versions or cable winches with multiple cable outlets.

Options: